Arlon and MOX-Tape
Product Introduction
Arlon, a division of Bairnco Corporation, a subsidiary of WHX Corporation, has been a leaderin silicone rubber and silicone adhesive technologies for nearly five decades.
Silicone rubber is a unique elastomer that delivers high performance for a wide variety of applications. Product uses range from thermal insulation pads and molded heat shields for aircraft, aerospace, and automotive applications to substrates forflame retardantflexible heaters, ducting,and motor coil insulation. We focus on precision-calendered silicone rubber, coated fabric, and specialty extruded silicone rubber tapes.
Arlon and MOX-TapeR :
silicone tapes are produced from specially formulated silicone rubber.
They bond irreversibly to provide an insulative barrier that is resistant to moisture,oxygen,ozone and corona over a wide temperature range (-65°F up to +500°F). Our products provide superior electrical insulation with a dielectric strength of 300 VPM minimum at 356°F/180°C
| TYPICAL PROPERTIES Thermal Stability | 356°F/180°C |
| Temperature Range | -65°F to +500°F (-54°C to +260°C) |
| Volume Resistivity | 1013 ohm-cm min. (ASTM D257) |
| Self Adhesion | 2 p.p.i min. (3.5 N/cm) (ASTMD2148) |
| Hardness | 50±10 Shore A (ASTM D2240) |
| Moisture Absorption | 0.9% (46 hrs. in H2O @ 70°F) |
NOTES: - The above properties are published as a guide only, and should not be used for specifications without testing in your own laboratory. - Arlon Tape and MOX-Tape product shelf life is 12 months from the date of manufacture when stored at 70+/- 5° F (21+/- 3° C). This statement applies to all fiberglass-supported and unsupported MOX-Tapes and all unsupported Arlon tapes (-P0, -P1, -P2, -P3, -P6, -M0, -M1, -M5, -M6 and -M7 tape suffixes).