PTS-113 LED Casting Tape
PTS-113 Polyester Film backing with silicone-based adhesive that will be high performance tape for printed circuit board masking where slightly less adhesive thickness is acceptable at low cost, undercutting is reduced, can be removed without leaving residue, excellent solvent resistance.
- Designed for sealing LED display during epoxy casting and followed first- cure ,post-cure process.
- Leave no adhesive residue after removal.
- Gives a flat and lusterless casting surface.
- Good dimensional stability, good thermal resistance.
- Good stability.
Standard Size :
Wide(mm) ：max width 1000mm
Roll Length(M)： standard 33M rolls, 3"i.d. core.
|Properties||Unit||Specification||Average Test Values|
|Thickness||mm(mil)||0.113 (4.45)||ASTM D1000|
|Tensile Strength||kg/25mm(lb/1”)||13 (28.6)||ASTM D1000|
|Adhesion to Steel||kg/25mm(oz/1”)||0.8 (28) min.avg.||ASTM D1000|