TYCO零鹵素熱縮套管
產品介紹
描述 :
Raychem零鹵素熱縮套管以100%通過UL測試,合乎UL VW-1, 224規範,UL file number is E35586
特性 :
分為厚壁和薄壁二種,耐熱125度耐電壓600V和300V二種,為現有熱收縮套管唯一零鹵素和通過UL認證的環保套管.
規格 :
Raychem ZH2 及 ZH4
1:以不含溴之防火原料製造.
2:依據室內(in house)測試,至2005年6月.
不含鹵素ZH2及ZH4熱縮套管
此為全世界首創之熱縮套管,能解決工程上之多項問題,合乎UL(VW-1)防燃標準.又因不使用含溴之原料,進一步滿足環保需求.具超柔軟度,有125度C抗燃力,在高溫環境下能保持品質穩定.針對各項不同之應用,有各種尺寸以便選擇.
其他特性:
ZH2:
UL224(VW-1) No. E35586
CSA22.2 No. 198.1
ZH4:
UL224(VW-1) No. E85381
CSA22.2 No. 198.1
遵循RoHS指示
只提供黑色套管
不使用含溴原料製造
規格表現:
ZH2
額定電壓: 600V
耐熱溫度: 125度C
耐燃性: UL224(VW-1) & CSA22.2 No.198.1
尺寸範圍: 0.8mm ~ 30.0mm(熱縮前內徑)
熱縮比率: 2:1
ZH4
額定電壓: 300V
耐熱溫度: 125度C
耐燃性: UL224(VW-1) & CSA22.2
No.198.1
尺寸範圍: 0.6mm ~ 10.0mm(熱縮前內徑)
熱縮比率: 2:1
產品規格: RW-3036
合乎UL標準,且不含鹵素,為全世界首創之抗燃熱縮套管.
TABLE 1 ZH2 TUBING DIMENSIONS, METRIC
| size | As Supplied (mm) | As Recovered (mm) | ||
|---|---|---|---|---|
| Inside Diameter | Wall Thickness | Inside Diameter | Wall Thickness | |
| Nominal | Maximum | Minimum | ||
| 0.8/0.4 | 1.2 ± 0.2 | 0.2 | 0.4 | 0.33 |
| 1.0/0.5 | 1.5 ± 0.2 | 0.2 | 0.5 | 0.33 |
| 1.5/0.75 | 2.1 ± 0.2 | 0.2 | 0.75 | 0.34 |
| 2.0/1.0 | 2.6 ± 0.2 | 0.25 | 1.0 | 0.43 |
| 2.5/1.25 | 3.1 ± 0.2 | 0.25 | 1.25 | 0.43 |
| 3.0/1.5 | 3.6 ± 0.2 | 0.25 | 1.5 | 0.43 |
| 3.5/1.75 | 4.1 ± 0.3 | 0.25 | 1.75 | 0.43 |
| 4.0/2.0 | 4.6 ± 0.3 | 0.25 | 2.0 | 0.43 |
| 5.0/2.5 | 5.6 ± 0.3 | 0.3 | 2.5 | 0.56 |
| 6.0/3.0 | 6.6 ± 0.3 | 0.3 | 3.0 | 0.56 |
| 7.0/3.5 | 7.6 ± 0.3 | 0.3 | 3.5 | 0.56 |
| 8.0/4.0 | 8.6 ± 0.3 | 0.3 | 4.0 | 0.56 |
| 9.0/4.5 | 9.6 ± 0.3 | 0.3 | 4.5 | 0.56 |
| 10.0/5.0 | 10.4 ± 0.3 | 0.3 | 5.0 | 0.56 |
| 11.0/5.5 | 11.4 ± 0.3 | 0.3 | 5.5 | 0.56 |
| 12.0/6.0 | 12.7 ± 0.3 | 0.3 | 6.0 | 0.56 |
| 13.0/6.5 | 13.5 ± 0.3 | 0.35 | 6.5 | 0.66 |
| 14.0/7.0 | 14.4 ± 0.4 | 0.35 | 7.0 | 0.68 |
| 15.0/7.5 | 15.7 ± 0.4 | 0.35 | 7.5 | 0.68 |
| 16.0/8.0 | 16.9 ± 0.4 | 0.35 | 8.0 | 0.68 |
| 18.0/9.0 | 19.0 ± 0.4 | 0.4 | 9.0 | 0.76 |
| 20.0/10.0 | 21.4 ± 0.4 | 0.4 | 10.0 | 0.76 |
| 22.0/11.0 | 23.2 ± 0.4 | 0.45 | 11.0 | 0.89 |
| 25.0/12.5 | 26.8 ± 0.4 | 0.45 | 12.5 | 0.89 |
| 28.0/14.0 | 30.0 ± 0.5 | 0.45 | 14.0 | 0.89 |
| 30.0/15.0 | 32.1 ± 0.5 | 0.45 | 15.0 | 0.89 |
TABLE 2 ZH4 TUBING DIMENSIONS, METRIC
| size | As Supplied (mm) | As Recovered (mm) | ||
|---|---|---|---|---|
| 0.6/0.3 | 0.95 ± 0.25 | 0.1 | 0.3 | 0.25 |
| 0.8/0.4 | 1.2 ± 0.25 | 0.1 | 0.4 | 0.25 |
| 1.0/0.5 | 1.4 ± 0.25 | 0.1 | 0.5 | 0.25 |
| 1.5/0.75 | 1.9 ± 0.25 | 0.1 | 0.75 | 0.25 |
| 2.0/1.0 | 2.3 ± 0.25 | 0.1 | 1.0 | 0.25 |
| 2.5/1.25 | 2.8 ± 0.25 | 0.15 | 1.25 | 0.25 |
| 3.0/1.5 | 3.3 ± 0.25 | 0.15 | 1.5 | 0.25 |
| 3.5/1.75 | 3.8 ± 0.25 | 0.15 | 1.75 | 0.25 |
| 4.0/2.0 | 4.4 ± 0.25 | 0.15 | 2.0 | 0.25 |
| 5.0/2.5 | 5.5 ± 0.25 | 0.15 | 2.5 | 0.25 |
| 6.0/3.0 | 6.5 ± 0.4 | 0.15 | 3.0 | 0.28 |
| 7.0/3.5 | 7.5 ± 0.4 | 0.15 | 3.5 | 0.28 |
| 8.0/4.0 | 8.5 ± 0.4 | 0.15 | 4.0 | 0.28 |
| 9.0/4.5 | 9.5 ± 0.4 | 0.15 | 4.5 | 0.28 |
| 10.0/5.0 | 10.5 ± 0.5 | 0.15 | 5.0 | 0.28 |
TABLE 3 Requirements
| PROPERTY | UNIT | REQUIREMENT | TEST METHOD |
|---|---|---|---|
| PHYSICAL Dimensions |
mm (inches) | In accordance with Tables 1& 2 |
Section 4.3.1 ASTM D 2671 |
| Dimensional Recovery | |||
| Longitudinal Change ZH2 - ASTM D 2671 ZH4 - ASTM D 2671 UL 224 |
Percent Percent Percent |
+1, -5 +1, -15 +3, -3 |
Section 4.3.1 ASTM D 2671 ASTM D 2671 UL 224 |
| Eccentricity (Recovered) |
Percent | 30 maximum | ASTM D 2671 |
| Tensile Strength | MPa (psi) | 10.3 (1500) minimum | Section 4.3.2 |
| Ultimate Elongation | Percent | 200 minimum | ASTM D 2671 |
| Secant Modulus (expanded), 2% | MPa (psi) | 172 (2.5 x 104) maximum | ASTM D 2671 |
| Low Temperature Flexibility 1 hour at -30°C (-22°F) |
- | No cracking | UL 224 |
| Heat Shock 4 hours at 250°C (482°F) |
- | No cracking | UL 224 |
| Heat Aging 7 days at 158°C (316°F) Followed by tests for: Tensile Strength Ultimate Elongation Dielectric Withstand at 2500 V Dielectric Breakdown Dielectric Strength |
- | - | UL 224 |
| MPa (psi) | 70% minimum of unaged specimens | Section 4.3.2 UL 224 |
|
| Percent | 100 minimum | ||
| Seconds | 60 minimum | Section 4.3.5 ASTM D 2671 |
|
| Volts | 50% minimum of unaged specimen | ||
| kV/mm (Volts/mil) |
19.7 (500) minimum | ||
| Copper Stability 7 days at 158°C (316°F) Followed by test for Ultimate Elongation |
No brittleness, glazing, cracking or severe discoloration of tubing. No pitting or blackening of copper. | Section 4.3.4 ASTM D 2671 |
|
| Percent | 100 minimum | Section 4.3.2 | |
| Restricted Shrinkage | - | Pass | UL 224 |
| ELECTRICAL Dielectric Withstand at 2500 V |
Seconds | 60 minimum | UL 224 |
| Dielectric Strength | kV/mm (Volts/mil) | 19.7 (500) minimum | Section 4.3.5 |
| Volume Resistivity | Ohm-cm | 1014 minimum | ASTM D 2671 |
TABLE 3 Requirements (continued)
| PROPERTY | UNIT | REQUIREMENT | TEST METHOD |
|---|---|---|---|
| CHEMICAL (continued) Corrosive Effect 7 days at 158°C (316°F) |
- | No Corrosion | Section 4.3.6 ASTM D 2671 |
| Halogen Content | Percent (ppm) | 0.1 (1000) maximum | Section 4.3.7 |
| Flammability | - | Pass | UL 224, VW-1 |
| Water Absorption (Recovered) 24 days at 23°C (73°F) |
Percent | 0.5 maximum | ASTM D 2671 |
| Fungus Resistance Followed by tests for: Tensile Strength Ultimate Elongation Dielectric Strength |
MPa (psi) percent kV/mm (Volts/mil) | 10.3 (1500) minimum 200 minimum 19.7 (500) minimum |
ISO 846 Method B Section 4.3.2 ASTM D 2671 ASTM D 2671 |